REFTCOFF=REFTCOFF_0, REFGENRDY=REFGENRDY_0, REFGENACT=REFGENACT_0, REFOUT=REFOUT_0, REFON=REFON_0, REFBGACT=REFBGACT_0, REFGENBUSY=REFGENBUSY_0, REFBGOT=REFBGOT_0, BGMODE=BGMODE_0, REFBGRDY=REFBGRDY_0, REFGENOT=REFGENOT_0, REFVSEL=REFVSEL_0
REF Control Register 0
| REFON | Reference enable 0 (REFON_0): Disables reference if no other reference requests are pending 1 (REFON_1): Enables reference in static mode |
| REFOUT | Reference output buffer 0 (REFOUT_0): Reference output not available externally 1 (REFOUT_1): Reference output available externally. If ADC14REFBURST = 0, output is available continuously. If ADC14REFBURST = 1, output is available only during an ADC14 conversion. |
| REFTCOFF | Temperature sensor disabled 0 (REFTCOFF_0): Temperature sensor enabled 1 (REFTCOFF_1): Temperature sensor disabled to save power |
| REFVSEL | Reference voltage level select 0 (REFVSEL_0): 1.2 V available when reference requested or REFON = 1 1 (REFVSEL_1): 1.45 V available when reference requested or REFON = 1 3 (REFVSEL_3): 2.5 V available when reference requested or REFON = 1 |
| REFGENOT | Reference generator one-time trigger 0 (REFGENOT_0): No trigger 1 (REFGENOT_1): Generation of the reference voltage is started by writing 1 or by a hardware trigger |
| REFBGOT | Bandgap and bandgap buffer one-time trigger 0 (REFBGOT_0): No trigger 1 (REFBGOT_1): Generation of the bandgap voltage is started by writing 1 or by a hardware trigger |
| REFGENACT | Reference generator active 0 (REFGENACT_0): Reference generator not active 1 (REFGENACT_1): Reference generator active |
| REFBGACT | Reference bandgap active 0 (REFBGACT_0): Reference bandgap buffer not active 1 (REFBGACT_1): Reference bandgap buffer active |
| REFGENBUSY | Reference generator busy 0 (REFGENBUSY_0): Reference generator not busy 1 (REFGENBUSY_1): Reference generator busy |
| BGMODE | Bandgap mode 0 (BGMODE_0): Static mode 1 (BGMODE_1): Sampled mode |
| REFGENRDY | Variable reference voltage ready status 0 (REFGENRDY_0): Reference voltage output is not ready to be used 1 (REFGENRDY_1): Reference voltage output is ready to be used |
| REFBGRDY | Buffered bandgap voltage ready status 0 (REFBGRDY_0): Buffered bandgap voltage is not ready to be used 1 (REFBGRDY_1): Buffered bandgap voltage is ready to be used |